In case you are planning to retailer your Boliy Generator for 4 months or longer the producer recommends taking long run storage precautions. It will guard in opposition to fluid deterioration and inner injury. You are able to do this on the Boliy Pro3600Si and Pro3600Si/E electrical begin.
DRAINING FUEL SYSTEM
To empty gas from system for long run storage, do the next:
A. Flip gas cock to ON. That is situated beneath recoil begin.
B. Begin engine and permit to run till it stops. It will empty tank and gas strains.
C. To empty extra gas from carburetor float bowl, loosen drain plug screw connected to plastic drainage tube exiting again panel of generator. Drainage screw could be reached with flat-head screwdriver via higher left gap of air flow grid in again panel.
CAREFUL: to not take away screw utterly; to exchange it, again panel of generator will must be pulled.
TIP: Should you take a flashlight and shine a beam via the spark-plug door it can assist you see the drainage screw!
PREPARING ENGINE FOR STORAGE:
So as to put together the engine for long run storage, do the next:
A. Take away spark-plug from cylinder. Into spark-plug gap pour small quantity(roughly 1 tablespoon) of 10W 30 or 10W 40 weight motor oil.
B. Reinstall plug; with engine swap OFF, use recoil begin to gently flip over engine 2 to three instances.
C. Gently pull on recoil begin one ultimate time, however solely till you start to really feel the power of compression.
This means that piston is in ascending place, the place you need it to be for storage.
REMEMBER: Draining oil from engine previous to storage will not be crucial. However when generator comes from storage, earlier than you refuel and run it once more, oil will must be changed.
For extra questions and solutions on Boliy mills go to: http://www.BoliyStore.com