1. Reuse and renew a screw
A damaged slot is often the result of removing and reseating screws. If your screwdriver blade was not sized for the screw, this is especially true. If you don’t have the right screw, you can attempt to repair it. This involves making the slot of the screw wider. To do this, you can use a hacksaw or a saw to make the holes. You will need a vise to ensure that the screw remains in its original place when you are trying to repair it. To hold the screws, do not use your fingers. You are protected from any injury and the threads.
You need to take out a Phillips head screw. However, you only have one screwdriver capable of removing slots. A hacksaw can be used to extend one of your slots across the head. This will enable you to use your screwdriver to loosen the screw.
2. Clear clogged screws
Use a scrap awl to remove paint from a screw.
3. A trick to track where the screws go
It can be easy to forget where the screws are when you’re working on large projects. This is a great way to keep track of all your screws. You will need a piece corrugated cardboard with slotted sides. You can use these slots to order your screws depending on when they were removed from your item. When assembling, it is helpful to write down notes on the cardboard.
4. Restore a stripped screw hole
Use a wood golf tee to plug a hole. Put the plug in place and fill the hole with glue. After the glue has dried you can drill the hole and insert the screw.